Fiat 500 Key Fob Replacement
If your 500 key fob doesn't work Try a different one to see if the vehicle can detect it. If it does, then the issue is likely to be related to the original fob's battery, or water damage.
First, replace the battery. Make sure that the new # CR2032 coin cell battery is correctly inserted with the "+" side facing down inside the fob.
Dead Battery
The majority of the time, when a fob doesn't work, it's because the battery is dead. This isn't a problem to fix and most fobs will provide you with a warning if the battery is getting depleted. You can find the correct procedure on YouTube for nearly any key fob for your car, or in the owner's manual. You can also take it to an area locksmith or the dealer who provided it to you to replace it.
Sometimes, a fob won't working due to a fault on the circuit board inside. It's not often however, it can occur. The internal chip can be damaged in the event you drop the fob onto something that is hard. This is also the case if you use an aftermarket key and the fob doesn't function. In this case it is required to visit a dealer locksmith to have the key reset so that it works with your 500.
One 2012 FIAT 500 Flip Key Remote that resembles Ilco brand with trunk, lock and lock buttons. It is a replacement keyless entry remote (will need to be cut and programmed by a locksmith)
Chips Damaged
Fiat 500 key fobs are wireless devices that transmit an electronic signal to the car when you press the button. It has a microchip that holds details about the code required to connect with your car. If the chip is damaged it will not transmit the correct code and the car won't start. A locksmith can repair the damage. United Locksmith can complete this repair on both traditional and modern models, so do not hesitate to contact us.
fiat punto key replacement can program a new key fob. It's cheaper to do this instead of going to the dealer and is just as effective. You'll need certain details to the locksmith, such as the year that your car was made and the model.
If you're not sure of the best solution to this problem, try rubbing the chip with the help of a US dollar bill. The copper in the bill is abrasive enough to remove oxidation and dirt, however, it won't cause damage to the microchip. The chip might not be repaired in the event that it has been physically damaged. This can happen if you drop it, run it over by accident with your vehicle or any other type of physical trauma.
Water Damage
Whether you accidentally dropped your keys in the pool, threw them in your bag while swimming at the beach, or splashed them with water on a wet day it's likely your fob will have some water damage. Even if it's just a small amount of water on the key, it can cause serious problems to the electronic components of the key.
It is possible to fix this issue by removing the fob and cleaning it using a paper towel. Once the fob is dry you can then replace the battery and it will start working normally.
You could also take your fob to a local locksmith or auto shop to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob is compatible with your car's computer.
If the key fob in your Fiat 500 stops working, you may be frustrated and stressed. You may be tempted to visit a dealer to get your key fob replaced, but this can be expensive and unaffordable. A locksmith can handle every aspect of the replacement of your car's key fob without the necessity of a dealer visit. For this reason, they are a far better choice than the dealership.
Pairing Issues
If you accidentally drop your keyfob or it ceases to function, and nothing else appears to be wrong, it could be the chip. This can be due to water damage, a dead battery or it could just be that you need to reprogramme it.
It is usually done by simply following the directions in your owner's manual. However, it's a good idea to hire an automotive locksmith assist you if you're experiencing problems or if the directions in the manual don't work for you. This will ensure that the chip isn't damaged and is the most cost-effective solution.
Another issue that plagues some 500 owners is that the key fob doesn't lock the car. This could be a problem when you intend to fill up at the gas station. Some owners have even reported the locking mechanism on their 500's failing and needing to replace the entire intermediate shaft of the steering. Fiat has actually mentioned this issue in an technical bulletin (TSB).
A reputable locksmith can help you should your Fiat has issues. They'll duplicate your key, or design an entirely new one that can lock and start the vehicle. They're able to do this without seeing your old key and are usually more affordable than purchasing it from a dealer.